American factories bought electricity in the 1890s and got almost nothing out of it for about 30 years.

Not because electricity did not work. It worked exactly as advertised. They just installed it into a building that had been designed around steam.

This is the single best explanation I have found for what is happening in our industry right now, and almost nobody in insurance has heard the story.

What the factories figured out

A steam-powered factory had one enormous engine. From that engine ran a drive shaft, usually along the ceiling, down the length of the building. Every machine on the floor connected to that shaft with a belt.

That one fact dictated everything. Machines had to sit close to the shaft, because a long belt wasted power. So factories were dense, tall, dark, and crammed. You did not arrange machines in the order the product got built. You arranged them by how close they could get to the shaft.

Then electric motors arrived. And the first thing factory owners did was exactly what you would expect. They pulled out the steam engine, dropped in one big electric motor, and connected it to the same drive shaft.

Productivity barely moved. For decades.

The gain showed up when a younger generation of managers did something different. They put a small motor on each individual machine. And once every machine had its own power, the shaft was unnecessary. And once the shaft was unnecessary, the machines could go anywhere.

Steam floor plan
One engine, one shaft

Machines arranged by how close they could get to the shaft.

Electric floor plan
A motor on every machine

Machines arranged in the order the work actually flowed.

So they rebuilt the floor. Single story. Spread out. Machines arranged in the order the work actually flowed. That is when the numbers moved, and they moved hard.

The economic historian Paul David wrote the definitive version of this story in a paper called The Dynamo and the Computer. Worth your time if you like this kind of thing.

The motor was not the innovation. The new floor plan was.

Now look at your agency

You bought the motor.

You have an AI tool. Probably several. Maybe a quoting tool, a summarizer, something that drafts emails, something that reads documents. Each one works. Each one demos well.

And your monthly software bill has gone up meaningfully in the last 18 months while the actual work of your agency has not gotten meaningfully better.

That is not a you problem. That is the drive shaft.

The floor plan most agencies run
1995
Workflow designed
2010
Technology added
2024
AI bolted on
TODAY
The layout has never changed

Most agencies are running a workflow designed in 1995, with technology added in 2010, and AI bolted on in 2024. The layout has never changed. Work still arrives in a shared inbox. It still gets assigned to whoever has time. The licensed CSR is still the center of the floor because that is where she has always sat, not because the work requires her.

You put a new motor on a 1995 floor plan.

“Bolting AI onto a broken process makes the broken process faster. That is not a win. That is a louder version of the same mess.”

The Independent Agency Operations Manual, Chapter 2

Why this is harder in insurance

Here is why the factory story is not a fair comparison, and I want to be honest about that before I use it.

A factory owner could see the drive shaft. It was a physical steel rod bolted to his ceiling. When somebody said tear it out, he knew exactly what they meant.

Your drive shaft is not a physical object. It is an accumulation of habits, job descriptions, and the fact that the AMS became the center of the building 30 years ago by default. There is no blueprint to redraw. You cannot walk the floor and point at the problem.

And you cannot just rip it out, because the AMS holds the record. Client data, policy data, claims history, billing. You still need all of it. Nobody is suggesting you throw away your system of record.

What you need is a floor plan in front of it. A layer where the work actually happens, that reads from the AMS and writes back to it, so that most of your team stops living inside a database that was never designed to be a workplace.

That is the AMS demotion. The AMS was the operating system. It becomes the database the operating system writes to. And the metric that tells you where you stand is embarrassingly simple: what percentage of your team opens the AMS in a given week? If most of them do not, you are paying for a system and using a database.

NexOne is the floor plan. Intake catches the work at every door. Routing decides where it goes. The AMS stays behind it, holding the record, getting written to when the work completes.

What to do about it

Do not buy another motor this quarter. Freeze it.

Instead, take one workflow, just one, and draw how it actually moves today. Every touch, every handoff, every person. Then draw it the way you would build it if you were starting today and knew what a machine can do.

Compare the two drawings. The gap between them is your drive shaft.

Then ask the only question that matters before any purchase. Not what should I buy. What should the work look like?

Efficiency is the floor. Transformation is the ceiling. Most agencies are still buying efficiency and wondering why their ceiling has not moved.